▲ IRONCRESTINDUSTRIALINDUSTRIAL SURPLUS BUYERS
CHICAGO CONTRACTOR SURPLUS BUYER

Sell Your Contractor Wire Surplus for Resale Value

Project leftovers, shop overstock, full and partial reels, pallet quantities, recurring cleanouts — Ironcrest Industrial Surplus buys contractor wire surplus anywhere in the country for resale value, not scrap value. Based in the Chicago area — and I’ll travel for the right load.

Contractor surplus wire on pallets and reels bought by Ironcrest for resale valueWE BUY
Contractor surplus wire on pallets and reels bought by Ironcrest for resale value
YOUR SHOP'S LEFTOVER WIRE HAS VALUE

Leftover wire from a job is inventory, not trash

You've probably heard the trade-magazine line that leftover wire is "rarely worth the effort." Tell that to the next contractor wiring a garage. Full reels from a job that downsized, partial reels left over from pull after pull, overstock your shop ordered and never used — another electrician will put all of it on the wall tomorrow.

Ironcrest Industrial Surplus buys that surplus anywhere in the country — based in Rolling Meadows, Illinois, traveling for the right load. We buy contractor wire for resale value, not scrap value — so wire your crew leaves behind may bring more than the yard would pay. One email with photos and reel tags is all it takes to find out: fast, free, no-obligation quote.

CONTRACTOR SURPLUS WE BUY

What qualifies as contractor wire surplus

If it came off a job, a reel rack, or a warehouse shelf in usable condition, it's worth a look.

Full and partial reels

New reels and opened reels with meaningful length left — THHN/THWN, XHHW, tray cable, and feeder wire, from small spools to large wooden reels.

Project leftovers

Wire left over when a job finishes, downsizes, or changes spec. Contractor takeoffs are usually the best-documented surplus there is.

Shop and warehouse overstock

Stock your shop ordered and never moved, discontinued lines, and inventory cleared for warehouse space. Romex/NM-B, MC cable, SOOW cord, and more.

Pallet quantities and mixed lots

Multiple reels, boxed wire, and mixed contractor lots in one shot. Send the inventory list and photos; we'll price the lot.

Recurring cleanouts

Shops that generate leftover wire on a regular basis can talk to us about a standing cleanout arrangement — one buyer for the wire your jobs keep producing.

Usable wire, honestly graded

Clean, undamaged, resale-grade material. For identification, jacket markings and reel tags tell the story, and a careful look at a cut conductor confirms copper from copper-clad aluminum.

HOW IT WORKS

A simple process built for busy shops

Contractors have the best-documented surplus — reel tags, jacket markings, and footage you already know. A quick list and a few photos is usually enough for a quote.

1. Send your surplus list

Photos of the reels and a quick inventory: what the reel tags say, conductor type, gauge, and footage. Email it to [email protected] or send it through the quote form.

2. Get a fast, free, no-obligation quote

We review your surplus and reply with our number fast. No hauling reels to the yard, no counter haggling.

3. Sell if the number works

If the offer works for your shop, we arrange the sale. If it doesn't, you spent five minutes on photos — the quote is free and there's no obligation.

IDENTIFICATION THAT PROTECTS VALUE

How we tell good surplus from scrap-grade

Usable contractor wire keeps its value when it can be identified. Jacket markings and reel tags tell us the conductor type, gauge, and footage at a glance. For copper verification, a careful look at an exposed or cut conductor is the check: solid copper shows copper all the way through, while copper-clad aluminum (CCA) looks copper on the outside but shows a silver-gray core when cut or lightly filed — CCA is priced differently than solid copper.

Never use a flame or lighter test on wire. A careful visual check of the conductor is all it takes, and it keeps the wire in resale condition.

Have breakers, panels, or gear too? See our Chicago electrical equipment buying page →

Have a few leftover rolls? Sell your leftover wire here →

CONTRACTOR WIRE BUYER — TRAVELS ANYWHERE

A buyer for contractor surplus — anywhere in the country

Ironcrest Industrial Surplus is based in Rolling Meadows, Illinois, and buys contractor wire surplus anywhere in the country — for the right load, I’ll travel to see it. Whether your shop runs one truck or a whole fleet, your leftover wire deserves a resale-grade buyer — not a furnace.

GET STARTED

Get your free, no-obligation surplus quote

Send your surplus list — reel tags, photos, footage — and get our number fast. Free quote, no obligation.

FREQUENTLY ASKED QUESTIONS

Contractor surplus questions, answered.

How fast can I get a quote on my surplus?

Within 24 hours. Send photos, reel tags, and your inventory list — you'll get a free, no-obligation quote the same way every time.

What quantities do you buy?

From a handful of reels to pallet quantities and mixed contractor lots. If your shop generates leftover wire regularly, ask about a standing cleanout arrangement.

Do you buy wire from takeout or demolition jobs?

We evaluate usable takeout wire for resale value — clean, undamaged lengths with identifiable markings. Wire that's burnt, crushed, or cut into short stubs is scrap-grade material.

What about mixed reels — different types and gauges?

Send the full list. Mixed lots get priced as a lot; clearly identified reels with readable jacket markings or reel tags price best, since we can see exactly what we're buying.

Can I sell overstock my shop never used?

Yes — unopened shop and warehouse overstock is some of the best surplus we see. Full reels of Romex/NM-B, MC cable, THHN, and SOOW cord from overstock are classic resale inventory.

How do I tell copper from copper-clad aluminum?

Check the jacket markings, then take a careful look at an exposed or cut conductor. Solid copper shows copper all the way through; copper-clad aluminum shows a silver-gray core when cut or lightly filed. Don't use a flame or lighter test — a visual check keeps the wire in resale condition.

What area do you serve?

Anywhere in the country. Ironcrest Industrial Surplus is based in Rolling Meadows, Illinois (Chicago area) — and for the right load, we’ll travel to see it.

Electrical contractor anywhere in the country with surplus wire, reels, or project leftovers? Email your surplus list to [email protected] or call 312-880-8174 — fast, free, no-obligation quote.

WHY SHOPS SELL TO IRONCREST

Resale value, not scrap value.

Every leftover-wire question has the same answer: the scrapyard pays for the copper inside; a resale buyer pays for the wire. Your surplus list and photos tell us which price your wire deserves.

Submit your surplus →

CALLSEND PHOTOS