We buy tungsten carbide tooling and scrap from New Jersey shops, plants and maintenance departments — most lots ship through our mail-in program, with freight and pickup for larger volumes. From our Chicago-area base.
Machine shops, plant maintenance departments, pharmaceutical and chemical facilities, food processors and fabrication shops in Newark, Jersey City, Paterson, Elizabeth, Edison and Trenton.
Send clear photos, approximate weight, whether the lot is sorted or mixed, and your New Jersey city. Brand and grade markings help when visible.
Carbide packs enormous value into a small box, which is why mail-in works so well. A coffee can of inserts or a box of worn end mills from a Newark shop or an Edison plant ships in a padded mailer. Price confirmed first, tracking number sent, settlement after receipt and verification.
If a magnet barely grabs it and it came off a cutting tool, it’s probably carbide: inserts, solid end mills, drills, burrs, reamers, wear parts, blades and dies. Steel-bodied tooling with carbide tips still counts — send photos and we’ll sort it out.
Solid carbide tooling, inserts and mixed lots are three different prices. Separate them when you can, and keep steel, ceramic and coated non-carbide pieces out of the box. Mixed lots still sell — they just price at the mixed rate.
Barrels of inserts, pallets of tooling and full shop or plant cleanouts don’t fit in a mailer. We’ll set up freight or coordinate pickup for qualified volumes — same deal, just a bigger box.
New Jersey’s plants and shops cut, grind and wear through tooling constantly. Most of it lands in a barrel by the grinder or a drawer in the tool crib — and it sits there until someone ships it.
Pharmaceutical and chemical plants around Edison, Elizabeth and central Jersey run in-house maintenance shops and packaging lines that cycle through tooling, blades and wear parts. Tool crib purges and line changeovers are prime lots.
Newark, Paterson and Elizabeth are dense with machine shops, job shops and fabricators. Used inserts, worn end mills and drills accumulate fast in a busy shop — one barrel can be a serious mail-in lot.
Food processing plants wear through blades, dies and wear parts on cutting and packaging lines, and port and warehouse equipment chews through wear components too. If your plant replaces wear parts on a schedule, the takeouts have a buyer.
Selling more than carbide? Ironcrest also buys copper wire and cable and used electrical equipment from New Jersey sellers.
Send photos and an approximate weight to [email protected] or call 312-880-8174. We confirm a price, then you mail the lot or ship it by freight. Barrels, pallets and full plant or shop cleanouts can qualify for coordinated pickup.
Used and unused inserts, solid carbide end mills and drills, burrs, reamers, wear parts, blades, dies and mixed carbide scrap. Plant maintenance takeouts and tool crib purges are welcome — send photos and we’ll identify the lot.
Carbide is very dense and only weakly magnetic compared to steel. If it came off an insert, end mill, drill or wear part, assume it’s carbide until told otherwise. When in doubt, photograph it and ask — misidentified tooling is the most common reason lots get underpriced at the local yard.
Photograph the lot, get the price confirmed, pack it tight in a sturdy box or padded mailer with your contact info inside, and send the tracking number. Settlement follows after the material arrives and is checked. Freight or pickup covers anything too heavy for parcel service.
Send photos for today’s price: photos, approximate weight, sorted or mixed, and your New Jersey city. Carbide prices move with the market, so per-pound numbers aren’t posted — but a photo and a weight get you a real number fast.
Have carbide inserts, end mills, drills or wear parts to sell in New Jersey? Send photos and approximate weight to [email protected] or call 312-880-8174 for today’s price.
Carbide and high-speed steel look similar to the untrained eye but price very differently. Photos let us identify what you actually have before it gets lumped in with ordinary steel scrap.
Photograph the material, nameplates and quantity, then send them through the quote form, by email or by phone.
We review what the material is, its condition and quantity, and whether it fits a direct purchase.
For qualifying material, we discuss a direct purchase offer and the next steps.