Keep carbide separate
Do not mix carbide with high-speed steel, steel or ceramics. A magnet test helps: carbide is only weakly magnetic because of its cobalt binder. Separation protects your payout.
OREGON CARBIDE BUYER
Sell Carbide Scrap & Tooling in Oregon.
We buy tungsten carbide inserts, end mills, drills, brazed tooling and grinding scrap from Oregon machine shops, manufacturers and individuals — by mail or freight.
What we buy
- Carbide inserts (new and used)
- End mills and drills
- Brazed carbide tooling
- Carbide saw tips
- Wear parts and blanks
- Grinding sludge and swarf
Who we work with
Machine shops, tool and die shops, manufacturers, oilfield service companies and individuals across Oregon.
What to send
Send clear photos, manufacturer or nameplate information when available, approximate quantity, city/state, condition and desired removal timing.
OREGON CARBIDE SOURCING
Where Oregon carbide scrap comes from
Oregon's Silicon Forest around Hillsboro and Beaverton hosts Intel's largest campus and a deep semiconductor supply chain, generating precision carbide tooling and electrical surplus. Portland's port, timber and paper legacy, and commercial construction market produce copper cable and demolition electrical gear, while data-center development in the Columbia Gorge adds UPS systems, busway, and power distribution equipment to the surplus stream.
Photograph quantities and brands
Spread inserts or tools so quantities are visible and capture brand names and part numbers where present. New-in-box tooling may carry resale value above scrap.
Ship it safely
Carbide is dense and brittle. Pack it in a sturdy box with padding so inserts do not chip in transit, include your contact information, and confirm the shipment with us first.
View Ironcrest’s complete carbide purchasing page →
Sell copper wire in Oregon →
Sell electrical equipment in Oregon →
How carbide scrap is evaluated
Tungsten carbide is valued by form, grade, and condition. New or unused inserts in original packaging command the strongest offers because they can re-enter the tooling supply chain. Used inserts, end mills, and drills are priced as scrap by weight, with solid carbide round tools typically outpacing brazed tooling. Grinding sludge and swarf have real value too, though they require assay or established recovery channels to price accurately.
The single biggest mistake sellers make is mixing carbide with other metals. A bucket of inserts tossed in with high-speed steel, steel shanks, or ceramic is worth a fraction of the same carbide kept clean. Keep a dedicated container at each machine, separate inserts from round tools if you can, and never let grinding sludge get contaminated with steel swarf. When in doubt, send photos before you ship — identification is free and it protects your payout.
SERVING OREGON
How Ironcrest buys from Oregon
Ironcrest Industrial Surplus is based in Rolling Meadows, Illinois, in the Chicago area. We buy from Oregon sellers every week: small and mid-size lots typically move by mail or freight after a photo review, and large commercial or plant-closure lots may qualify for coordinated pickup. Start by sending photos, quantities, and your city — we will confirm the fastest way to get your material evaluated and paid.
Industrial centers we regularly hear from: Portland, Salem, Eugene, Hillsboro, Beaverton, and Bend.
Typical sellers: semiconductor support shops, precision machine shops, data-center contractors, commercial electrical contractors, timber and paper mills, and demolition companies.
FREQUENTLY ASKED QUESTIONS
Oregon questions, answered.
What carbide tooling and scrap do you buy from Oregon sellers?
We evaluate carbide inserts, end mills, drills, round tools, brazed tooling, saw tips, wear parts, and grinding sludge. New or unused tooling in original packaging may carry resale value above scrap. Send photos showing quantities, brands, and part numbers when visible.
Do you buy mixed or unsorted carbide scrap?
Yes, but sorted material is worth more. Keep carbide separate from high-speed steel, steel, and ceramics. If you are unsure what you have, send photos and we will help identify it before you ship anything.
How does your mail-in carbide program work?
Send photos of the material first for an initial review. Once confirmed, pack the carbide in a sturdy box with padding, include your contact information, and ship it. We verify the material on arrival and issue payment. Small shops and individuals across the country use this program regularly.
How do I get today's price for carbide scrap?
Send photos, estimated weight, and the type of tooling or scrap. We price each lot from current market conditions and the form and grade of the material, so public per-pound prices are not posted.
Do you pick up carbide in Oregon?
Ironcrest is based in Rolling Meadows, Illinois and buys carbide nationally by mail. For large commercial quantities, freight or coordinated pickup can be arranged. Send photos and your location so we can confirm the best option for your lot.
Have carbide tooling or scrap to sell in Oregon? Send photos, quantity, and your city to [email protected] or call 312-880-8174 for today’s price.
WHY SEND PHOTOS FIRST
Identification protects value.
Industrial equipment can be worth more intact than as scrap. Clear photos and nameplates help determine whether resale, component recovery or commodity recovery is the best path.
HOW SELLING WORKS
Three steps to an offer.
Send photos
Photograph the material, nameplates and quantity, then send them through the quote form, by email or by phone.
Material review
We review what the material is, its condition and quantity, and whether it fits a direct purchase.
Receive an offer
For qualifying material, we discuss a direct purchase offer and the next steps.