Sell Your Carbide Scrap in Kouts, Indiana

Carbide inserts

Used and worn lathe and mill inserts from repair and fab shops — any brand, any grade, loose or in drums.

End mills and drills

Solid carbide end mills, drills, reamers, and taps — dull, broken, or chipped, they all count.

Brazed tooling

Brazed carbide lathe bits, saw blades, and wear tooling from equipment repair and ag service work — sorted honestly, never lumped in with steel.

Grinding sludge

Carbide grinding sludge and turnings from sharpening and regrind work — we test it and pay on recovery.

Tungsten heavy alloy

Heavy-alloy parts like boring bars and counterweights — XRF-verified and graded by tungsten content.

See everything we buy and how the process works at Sell Carbide Scrap, and read our plain-English market breakdown at Scrap Carbide Prices.

Kouts does not have a big industrial park — it has something better for carbide, which is a handful of serious shops that run busy all year. The ag service businesses keep farm equipment in the field, the repair shops fix everything from tractors to trailers, and the trades working the surrounding farm country generate a constant drip of worn tooling: inserts burned out on the lathe, saw blades dulled on repair jobs, drills and end mills snapped on fabrication work. None of it is a truckload by itself, but over a season a good shop fills a drum without even noticing.

That is the seller I am built for. The big-city yards are set up for big-city loads, but I am an owner-operator who buys carbide by the bucket as happily as by the barrel — I drive the scheduled route, I grade every pound in front of you, and I pay fast. Small towns remember how they were treated, and I want Kouts to remember me as the buyer who showed up, graded straight, and made the drum worth the floor space.

Here is the honest difference between me and the general scrap yard the next town over. A general yard buys carbide as just another metal — it gets blended into a mixed load and paid at a blended rate that drags your carbide down to the level of cheap mixed metal. They do not sort grades, because sorting carbide properly is its own job.

I do one thing: I buy carbide, and I grade it with an XRF analyzer that reads the metal’s actual composition in seconds. Inserts, brazed tooling, and heavy alloy each carry different value, so each gets its own number — today’s number for that grade, not an average dragged down by whatever else was in the load. That is why repair shops and trades across south Porter County call a specialist instead of hauling carbide to the general yard.

When you text 312-880-8174, I answer — Sonny, the owner of Ironcrest Industrial Surplus. There is no call center, no broker in the middle, and no trainee learning on your material. I run the XRF test, I make the offer, and I am the one who shows up on the pickup run.

Small-town sellers talk, and my name travels on the quality of the last deal. If I grade your carbide straight and pay fast, you tell the next shop in Kouts. That is the whole business plan, and it is why sellers across Porter County keep my number in their phones.

Do you buy tungsten carbide scrap in Kouts, Indiana?

Yes — from repair shops, ag service businesses, and trades across Kouts and south Porter County. Inserts, end mills, drills, brazed tooling, wear parts, and grinding sludge — any quantity.

How do I get today’s number?

Text a photo of your material to 312-880-8174 and I will tell you what grade it is and today’s number — fast, no games. My price is published right on this page: a firm $18–$20 a pound for clean, sorted tungsten carbide inserts, end mills, and drills. The national buyer boards pay $8–$15 a pound — scrap yards are not paying a fair price, and I pay way more than the national average. You watch the digital scale, and you are paid within 24–48 hours.

Do you pick up carbide in Kouts?

Yes, on our scheduled pickup runs through Porter County — send photos and I will tell you when I can be there. Small lots can mail in with a prepaid label instead.

How is carbide graded?

With an XRF analyzer — a handheld scanner that reads the metal’s composition in seconds. That tells us the grade, and each grade gets today’s number for that grade. No blending, no guessing.

How do I know my tooling is real carbide?

Real carbide is heavy for its size — it feels wrong in your hand, roughly twice the weight of steel. A magnet test helps, since most carbide is only slightly magnetic. Our guide How to Spot Real Tungsten Carbide walks through the checks. When in doubt, text a photo — I will tell you straight.

Based in Rolling Meadows, Illinois, we buy carbide scrap across Northwest Indiana, including Hebron, Valparaiso, and DeMotte. See all service areas.