Sell Your Carbide Scrap in Porter, Indiana

Carbide inserts

Used and worn inserts from slitters, levelers, and machining work around the lakefront strip — any brand, any grade, loose or in drums.

End mills and drills

Solid carbide end mills, drills, reamers, and taps from fab and maintenance shops — dull, broken, or chipped, they all count.

Brazed tooling

Brazed carbide lathe bits, saws, and wear tooling from the service centers and fab shops — sorted honestly, never lumped in with steel.

Grinding sludge

Carbide grinding sludge and turnings from sharpening and regrind work — we test it and pay on recovery.

Tungsten heavy alloy

Heavy-alloy parts like boring bars and counterweights — XRF-verified and graded by tungsten content.

See everything we buy and how the process works at Sell Carbide Scrap, and read our plain-English market breakdown at Scrap Carbide Prices.

Everything around Porter is steel. The Port of Indiana — Burns Harbor is one of the busiest industrial harbors on the Great Lakes, and the steel service centers and coil processors clustered around it run slitters, levelers, and presses that wear through inserts and wear parts fast. Fabricators and maintenance contractors along the lakefront industrial strip go through brazed tooling, saw blades, and drills every week. That carbide piles up in drums and corners of shops all along the strip — and too much of it rides out mixed with general mill scrap at a fraction of what graded carbide is worth.

Porter is a small town with heavy-industry neighbors, and the contractors who work the port and the processors know each other by name. I am a newcomer to this trade who treats every seller like a long-term partner, and I grade every pound of carbide in front of you so you see exactly what you have. When you sell once, you know who to call the next time the drum is full.

Here is the honest difference between me and the general scrap yard. A general yard buys carbide as just another metal — it gets tossed into a mixed load and paid at a blended rate that drags your carbide down to the level of the cheapest thing in the pile. They do not sort grades, because sorting carbide properly is its own job.

I do one thing: I buy carbide, and I grade it with an XRF analyzer that reads the metal’s actual composition in seconds. Inserts, brazed tooling, and heavy alloy each carry different value, so each gets its own number — today’s number for that grade, not an average dragged down by whatever else rode along. That is why service centers and contractors around the lakefront call a specialist instead of hauling carbide to the general yard.

When you text 312-880-8174, I answer — Sonny, the owner of Ironcrest Industrial Surplus. There is no call center, no broker in the middle, and no trainee learning on your material. I run the XRF test, I make the offer, and I am the one who shows up on the pickup run.

Lakefront contractors know each other, and my name travels on the quality of the last deal. If I grade your carbide straight and pay fast, you tell the next shop. That is the whole business plan, and it is why sellers across Northwest Indiana keep my number in their phones.

Do you buy tungsten carbide scrap in Porter, Indiana?

Yes — from steel service centers, coil processors, fabricators, and maintenance contractors around Porter and the lakefront industrial strip. Inserts, end mills, drills, brazed tooling, wear parts, and grinding sludge — any quantity.

How do I get today’s number?

Text a photo of your material to 312-880-8174 and I will tell you what grade it is and today’s number — fast, no games. My price is published right on this page: a firm $18–$20 a pound for clean, sorted tungsten carbide inserts, end mills, and drills. The national buyer boards pay $8–$15 a pound — scrap yards are not paying a fair price, and I pay way more than the national average. You watch the digital scale, and you are paid within 24–48 hours.

Do you pick up carbide in Porter?

Yes, on our scheduled pickup runs across Northwest Indiana — send photos and I will tell you when I can be there. Small lots can mail in with a prepaid label instead.

How is carbide graded?

With an XRF analyzer — a handheld scanner that reads the metal’s composition in seconds. That tells us the grade, and each grade gets today’s number for that grade. No blending, no guessing.

How do I know my tooling is real carbide?

Real carbide is heavy for its size — it feels wrong in your hand, roughly twice the weight of steel. A magnet test helps, since most carbide is only slightly magnetic. Our guide How to Spot Real Tungsten Carbide walks through the checks. When in doubt, text a photo — I will tell you straight.

Based in Rolling Meadows, Illinois, we buy carbide scrap across Northwest Indiana, including Chesterton, Burns Harbor, and Portage. See all service areas.