Light-industrial shops
Machine shops in the districts generate inserts, end mills and drills steadily. Photograph the lot with an estimated weight.
EVANSTON CARBIDE BUYER
Sell Carbide Scrap in the Evanston Area.
Light-industrial shops, contractors and tool rooms across Evanston and the north shore can send Ironcrest photos of carbide inserts, end mills, drills and tooling for evaluation.
What we buy
- Solid carbide end mills and drills
- Indexable carbide inserts
- Carbide dies, punches and wear parts
- Broken or worn carbide tooling
- Unused or surplus carbide
- Recurring machine-shop carbide generation
Who we work with
Light-industrial shops, contractors, maintenance departments and tool rooms across Evanston.
What to send
Send clear photos, manufacturer or nameplate information when available, approximate quantity, city/state, condition and desired removal timing.
LOCAL CARBIDE PURCHASING
North shore industry still runs carbide
Evanston’s light-industrial districts along the rail corridors hold machine shops, fabricators and contractors serving the north shore economy. The shops machining steel and running repair work generate worn inserts, drills and solid tooling steadily, and the area’s older buildings hold tool rooms with years of accumulated tooling — cleanout lots that reward a buyer who knows carbide. The north shore’s older industrial buildings have accumulated tooling for decades, so estate and cleanout lots here can be exceptional.
Ironcrest buys from Evanston-area shops, contractors and individuals. Estate lots, shop cleanouts and recurring streams are all reviewed the same way: photos, estimated weight and location first, then a straight answer on pickup and terms.
Contractors
North shore contractors generate worn tooling from heavy rework. Photograph it before it goes in the scrap trailer.
Tool rooms and estates
Older tool rooms and estate lots surface the best finds — sorted inserts, boxed tooling and surplus. Send photos with any markings visible.
Review nationwide mail-in carbide options → · See all carbide service areas →
Areas we serve around Evanston: Skokie, Wilmette, Chicago, Lincolnwood, Morton Grove, Niles, Glenview, Winnetka.
FREQUENTLY ASKED QUESTIONS
Evanston carbide questions, answered.
Do you pick up carbide in Evanston?
Yes, for qualifying lots. Send photos, an estimated weight and your location in the Evanston area. We will review the material and discuss local pickup, route service or mail-in depending on quantity.
I inherited a garage full of tooling in Evanston. How do I know if any of it is carbide?
Send photos — close-ups of inserts, end mills and drills with any markings visible. We will help identify what is carbide and what is not, then discuss local pickup, route service or mail-in depending on quantity.
What carbide materials do you buy?
We evaluate used carbide inserts, end mills, drills, burrs, tooling, wear parts and clean carbide scrap. We also review unused or new-old-stock tooling that may have resale value. Keep carbide separated from high-speed steel and other metals when possible.
Do you buy mixed or broken carbide?
Yes, depending on composition and contamination. Broken inserts, worn cutting tools and mixed carbide may still be valuable. Remove loose steel, packaging, coolant and general shop debris before photographing or weighing the lot.
Can I mail carbide to Ironcrest?
Mail-in review may be available for smaller, properly packaged lots. Contact us before shipping. Send photos and estimated weight first, then wait for packing, labeling and destination instructions. Do not ship a lot without confirmation.
Send photos, estimated weight, tool type, markings, and location for today's price. Email [email protected] or call 312-880-8174.
WHY SEND PHOTOS FIRST
Identification protects value.
Industrial equipment can be worth more intact than as scrap. Clear photos and nameplates help determine whether resale, component recovery or commodity recovery is the best path.
New: Explore the Ironcrest Carbide Resource Center — grades, markets, identification guides, and interactive tools.
HOW SELLING WORKS
Three steps to an offer.
Send photos
Photograph the material, nameplates and quantity, then send them through the quote form, by email or by phone.
Material review
We review what the material is, its condition and quantity, and whether it fits a direct purchase.
Receive an offer
For qualifying material, we discuss a direct purchase offer and the next steps.