Heavy-equipment suppliers
Shops machining large, hard parts for the heavy-equipment supply chain run high insert counts. That worn tooling has strong recovery value — keep it carbide-only.
PEORIA CARBIDE BUYER
Sell Carbide Scrap in the Peoria Area.
Machine shops, foundries and heavy-equipment suppliers across the Peoria area can send Ironcrest photos of carbide inserts, end mills, drills and tooling for evaluation.
What we buy
- Solid carbide end mills and drills
- Indexable carbide inserts
- Carbide dies, punches and wear parts
- Broken or worn carbide tooling
- Unused or surplus carbide
- Recurring machine-shop carbide generation
Who we work with
Machine shops, foundries, heavy-equipment suppliers and fab shops across the Peoria area.
What to send
Send clear photos, manufacturer or nameplate information when available, approximate quantity, city/state, condition and desired removal timing.
LOCAL CARBIDE PURCHASING
Heavy equipment country runs on carbide
Peoria is heavy-equipment country. As the longtime home of Caterpillar, the area’s manufacturing base — foundries, fab shops, machine shops and suppliers up and down the Illinois River — machines big, hard parts that eat tooling. Large-diameter work, tough alloys and high insert counts are the norm here, and the carbide that comes off Peoria-area floors is some of the heaviest generation in downstate Illinois.
Ironcrest buys from Peoria-area shops, suppliers and individuals. Production floors with steady insert volume can discuss recurring collection; one-time cleanouts, maintenance-shop accumulations and estate lots are reviewed from photos. Send the material with an estimated weight and your location, and we will give a straight answer on the best way to move it.
Foundries and fab shops
Foundry-adjacent machine shops and fab operations accumulate drills, end mills and inserts from tough work. A dedicated bucket at the tool crib captures it.
Maintenance and repair shops
Equipment rebuild and repair shops across the Peoria area generate carbide from rework daily. Small, steady lots add up — photograph and send when the bucket fills.
Review nationwide mail-in carbide options → · See all carbide service areas →
Areas we serve around Peoria: East Peoria, Pekin, Morton, Washington, Bartonville, Dunlap, Chillicothe, Canton.
FREQUENTLY ASKED QUESTIONS
Peoria carbide questions, answered.
Do you pick up carbide in Peoria?
Yes, for qualifying lots. Send photos, an estimated weight and your location in the Peoria area. We will review the material and discuss pickup, route service or mail-in depending on quantity.
We machine large, heavy parts. Does that change what our carbide is worth?
The evaluation is the same — material type, cleanliness and quantity against current markets — but heavy-part shops often generate impressive volume. Photograph the inserts and tooling with an estimated weight and we will review it.
What carbide materials do you buy?
We evaluate used carbide inserts, end mills, drills, burrs, tooling, wear parts and clean carbide scrap. We also review unused or new-old-stock tooling that may have resale value. Keep carbide separated from high-speed steel and other metals when possible.
Can machine shops set up recurring carbide pickups?
Yes. Shops with steady insert and tooling volume can ask about recurring collection or a commercial account. Share the typical monthly quantity, container type, pickup location and current sorting process so we can assess a workable program.
Can I mail carbide to Ironcrest?
Mail-in review may be available for smaller, properly packaged lots. Contact us before shipping. Send photos and estimated weight first, then wait for packing, labeling and destination instructions. Do not ship a lot without confirmation.
Send photos, estimated weight, tool type, markings, and location for today’s price. Email [email protected] or call 312-880-8174.
WHY SEND PHOTOS FIRST
Identification protects value.
Industrial equipment can be worth more intact than as scrap. Clear photos and nameplates help determine whether resale, component recovery or commodity recovery is the best path.
New: Explore the Ironcrest Carbide Resource Center — grades, markets, identification guides, and interactive tools.
HOW SELLING WORKS
Three steps to an offer.
Send photos
Photograph the material, nameplates and quantity, then send them through the quote form, by email or by phone.
Material review
We review what the material is, its condition and quantity, and whether it fits a direct purchase.
Receive an offer
For qualifying material, we discuss a direct purchase offer and the next steps.