Golf Road corridor shops
Machine shops along the corridor generate inserts, end mills and drills daily. Photograph the lot with an estimated weight.
ROLLING MEADOWS CARBIDE BUYER
Sell Carbide Scrap in the Rolling Meadows Area.
Machine shops, tool rooms and contractors across Rolling Meadows — Ironcrest’s home town — can send us photos of carbide inserts, end mills, drills and tooling for evaluation.
What we buy
- Solid carbide end mills and drills
- Indexable carbide inserts
- Carbide dies, punches and wear parts
- Broken or worn carbide tooling
- Unused or surplus carbide
- Recurring machine-shop carbide generation
Who we work with
Machine shops, tool rooms, contractors and individuals across Rolling Meadows, where Ironcrest Industrial Surplus is based.
What to send
Send clear photos, manufacturer or nameplate information when available, approximate quantity, city/state, condition and desired removal timing.
LOCAL CARBIDE PURCHASING
Our home town runs on carbide too
Rolling Meadows is home base for Ironcrest Industrial Surplus, and the Golf Road corridor’s light-industrial districts give us carbide generation right in our own backyard. Machine shops, tool rooms and contractors along the corridor burn through inserts, solid end mills and drills steadily, and being local means the fastest reviews and the simplest logistics — this is the town we know best, street by street.
Ironcrest buys from Rolling Meadows-area shops, contractors and individuals. Being based here means quick photo reviews and easy coordination — send photos, an estimated weight and your location, and we will give a straight answer on pickup and terms.
Tool rooms and cleanouts
Tool-room cleanouts surface sorted inserts, drills and surplus tooling. Send photos with any markings visible.
Local contractors
Contractors working the corridor generate worn tooling from heavy rework. Photograph it before it goes in the scrap trailer.
Review nationwide mail-in carbide options → · See all carbide service areas →
Areas we serve around Rolling Meadows: Arlington Heights, Palatine, Hoffman Estates, Schaumburg, Elk Grove Village, Mount Prospect, Buffalo Grove, Inverness.
FREQUENTLY ASKED QUESTIONS
Rolling Meadows carbide questions, answered.
Do you pick up carbide in Rolling Meadows?
Yes, for qualifying lots. Send photos, an estimated weight and your location in the Rolling Meadows area. We will review the material and discuss local pickup, route service or mail-in depending on quantity.
You are based in Rolling Meadows — does that make pickup easier?
Yes. Being local means the fastest photo reviews and the simplest logistics in the area. Send photos, an estimated weight and your location in Rolling Meadows, and we will discuss local pickup, route service or mail-in depending on quantity.
What carbide materials do you buy?
We evaluate used carbide inserts, end mills, drills, burrs, tooling, wear parts and clean carbide scrap. We also review unused or new-old-stock tooling that may have resale value. Keep carbide separated from high-speed steel and other metals when possible.
Do you buy mixed or broken carbide?
Yes, depending on composition and contamination. Broken inserts, worn cutting tools and mixed carbide may still be valuable. Remove loose steel, packaging, coolant and general shop debris before photographing or weighing the lot.
Can I mail carbide to Ironcrest?
Mail-in review may be available for smaller, properly packaged lots. Contact us before shipping. Send photos and estimated weight first, then wait for packing, labeling and destination instructions. Do not ship a lot without confirmation.
Send photos, estimated weight, tool type, markings, and location for today's price. Email [email protected] or call 312-880-8174.
WHY SEND PHOTOS FIRST
Identification protects value.
Industrial equipment can be worth more intact than as scrap. Clear photos and nameplates help determine whether resale, component recovery or commodity recovery is the best path.
New: Explore the Ironcrest Carbide Resource Center — grades, markets, identification guides, and interactive tools.
HOW SELLING WORKS
Three steps to an offer.
Send photos
Photograph the material, nameplates and quantity, then send them through the quote form, by email or by phone.
Material review
We review what the material is, its condition and quantity, and whether it fits a direct purchase.
Receive an offer
For qualifying material, we discuss a direct purchase offer and the next steps.