CNC job shops
CNC shops generate the most consistent carbide we see — worn inserts, solid end mills and drills. Photograph the lot with an estimated weight.
WHEELING CARBIDE BUYER
Sell Carbide Scrap in the Wheeling Area.
Machine shops, job shops and tool rooms along the Wheeling industrial corridor can send Ironcrest photos of carbide inserts, end mills, drills and tooling for evaluation.
What we buy
- Solid carbide end mills and drills
- Indexable carbide inserts
- Carbide dies, punches and wear parts
- Broken or worn carbide tooling
- Unused or surplus carbide
- Recurring machine-shop carbide generation
Who we work with
Machine shops, job shops, contractors and tool rooms across Wheeling and the Milwaukee Avenue corridor.
What to send
Send clear photos, manufacturer or nameplate information when available, approximate quantity, city/state, condition and desired removal timing.
LOCAL CARBIDE PURCHASING
The Milwaukee Avenue corridor machines everything
Wheeling's industrial corridor along Milwaukee Avenue packs in machine shops, job shops and manufacturers serving everything from automotive to industrial equipment. Shops running CNC equipment burn through indexable inserts and solid tooling every week — worn end mills, drills and insert edges that accumulate in tool rooms until someone who knows carbide shows up.
Ironcrest buys from Wheeling-area shops, contractors and individuals. Recurring streams, one-time cleanouts and estate lots are all reviewed the same way: photos, estimated weight and location first, then a straight answer on pickup and terms.
Tool rooms
Tool-room cleanouts surface sorted inserts, drills and surplus tooling. Send photos with any markings visible.
Manufacturers
Manufacturers in the corridor generate carbide from production machining. Recurring streams are our favorite material.
Review nationwide mail-in carbide options → · See all carbide service areas →
Areas we serve around Wheeling: Buffalo Grove, Prospect Heights, Arlington Heights, Northbrook, Glenview, Palatine, Des Plaines, Mount Prospect.
FREQUENTLY ASKED QUESTIONS
Wheeling carbide questions, answered.
Do you pick up carbide in Wheeling?
Yes, for qualifying lots. Send photos, an estimated weight and your location in the Wheeling area. We will review the material and discuss local pickup, route service or mail-in depending on quantity.
I have a mix of inserts, end mills and drills. Do they need to be sorted?
No — send it as-is. Photograph the lot with an estimated weight. We evaluate used carbide inserts, end mills, drills, burrs, tooling, wear parts and clean carbide scrap, mixed or sorted.
What carbide materials do you buy?
We evaluate used carbide inserts, end mills, drills, burrs, tooling, wear parts and clean carbide scrap. We also review unused or new-old-stock tooling that may have resale value. Keep carbide separated from high-speed steel and other metals when possible.
Do you buy mixed or broken carbide?
Yes, depending on composition and contamination. Broken inserts, worn cutting tools and mixed carbide may still be valuable. Remove loose steel, packaging, coolant and general shop debris before photographing or weighing the lot.
Can I mail carbide to Ironcrest?
Mail-in review may be available for smaller, properly packaged lots. Contact us before shipping. Send photos and estimated weight first, then wait for packing, labeling and destination instructions. Do not ship a lot without confirmation.
Send photos, estimated weight, tool type, markings, and location for today's price. Email [email protected] or call 312-880-8174.
WHY SEND PHOTOS FIRST
Identification protects value.
Industrial equipment can be worth more intact than as scrap. Clear photos and nameplates help determine whether resale, component recovery or commodity recovery is the best path.
New: Explore the Ironcrest Carbide Resource Center — grades, markets, identification guides, and interactive tools.
HOW SELLING WORKS
Three steps to an offer.
Send photos
Photograph the material, nameplates and quantity, then send them through the quote form, by email or by phone.
Material review
We review what the material is, its condition and quantity, and whether it fits a direct purchase.
Receive an offer
For qualifying material, we discuss a direct purchase offer and the next steps.